APPENDIX 22

TECHNOLOGICAL CHARACTERISTICS OF DEVICES WITH RADIOFREQUENCY TECHNOLOGY

A. TECHNOLOGICAL DEVICE.

The characteristics of the technological device to perform the customs clearance of the merchandise in accordance with rule 2.4.11. (RGCE 2020: Regla 2.4.12), will be the following:

I. Physical Specifications:

a) PVC laminated plastic material.

b) Dimensions 85.60 x 53.98 mm based on ISO/IEC 7810 ID-1.

c) Temperature supported between -25 ° C to 50 ° C.

d) Reusable at the user's discretion.

II. Technological Specifications:

It must contain two chips, one for proximity reading and one for long-range reading, both passive, with the ability to read, write, and rewritable, with the following characteristics:

1. Chip for proximity reading:

a) Interface protocol: ISO/IEC 14443-A Mifare Plus SE 1k.

b) Operating frequency: 13.56 MHz HF band.

c) Memory: 1 KB organized in 16 sectors.

d) Recording format according to the guidelines issued for this purpose by the General Customs Administration (Administración General de Aduanas), which will be announced on the Service Tax Administration (Servicio de Administración Tributaria) Portal.

2. Chip for long range reading:

a) Interface protocol: ISO-18000-6C.

b) Operating frequency: UHF 860-960MHz.

c) Memory: Minimum of 64 bytes and 96-bit TID (Tag ID).

d) Recording format according to the guidelines issued for this purpose by the General Customs Administration (Administración General de Aduanas), which will be announced on the Service Tax Administration (Servicio de Administración Tributaria) Portal.

B. TRANSPONDER

The characteristics of the transponder for the terrestrial transport service and the owners of cargo vehicles referred to in rule 2.4.4. (RGCE 2020: Regla 2.4.5), will be the following:

a) Adhesive Label (Windshield Sticker Tag)

b) Operating Frequency UHF 860-960 MHZ.

c) Reading distance 10 m / 32.8 ft.

d) Proposed dimensions 85.6 x 54 x 0.6 mm / 3.4 x 2.1 x 0.02 in.

e) Operating Temperature -10°C a + 80°C / 14°F a 176°F

f) ISO 18000-6B protocol.

The transponder must be attached to the windshield of the cargo vehicle. Terrestrial transport vehicles and cargo vehicles that already have the transponder that are used by the Bureu of Customs and Border Protection (CBP), can use it for the provisions of subsection e), section III, of rule 2.4 .4. (RGCE 2020: Regla 2.4.5)